Mantis "E" System Manuel de l'opérateur télécharger pdf (Page 6)

Assembling the Line Trimmer

1. Locate and open sealed bag with 3 screws, 3 split washers,

clamp plate #2 and L-pin. (Picture 1)

2. Remove plastic tube and gear case cover #4 from the

threaded shaft.

3. Place plastic guard over the gear case flange, and place

clamp plate #2 over the plastic guard. Align holes and

attach it with three screws to the Trimmer Attachment

Assembly. (Picture 3)

4. Place gear case cover #4 onto the gear shaft.

(Pictures 4 and 5)

5. Lock the gear shaft by inserting the supplied pin through

the slot in the plastic guard and into the aligned openings

in the gear case cover and gear case (Pictures 6). Screw in

the Spool Holder with the spool to the gear shaft by

turning it counter clockwise (Pictures 7). Hand tighten it

securely and remove pin. (Picture 8)

Picture 1

Picture 2

Picture 3

Picture 4

Picture 5

Picture 6

Picture 7

Picture 8

Plastic Guard

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Mantis "E" System Manuel de l'opérateur Page 6