Mantis Reel Mower Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
WARNING
AFTER MOUNTING BRUSH TO A MACHINE, START
MACHINE AND RUN AT OPERATING SPEED IN A
PROTECTED ENCLOSURE FOR AT LEAST ONE
MINUTE BEFORE USING, DURING WHICH NO ONE
SHALL STAND IN FRONT OF, OR IN LINE WITH THE
BRUSH. SAFETY GOGGLES OR FULL FACE SHIELDS
WORN OVER SAFETY GLASSES WITH SIDE SHIELDS
MUST BE WORN BY ALL OPERATORS AND OTHERS
IN THE AREA OF POWER BRUSH OPERATIONS.
COMPLY WITH THE REQUIREMENTS OF ANSI Z871.
END BRUSH SHANKS MUST BE FULLY INSERTED
INTO THE CHUCK OR COLLECT AND TIGHTENED
SECURELY. REFER TO AND COMPLY WITH ANSI B
1651 FOR FURTHER SAFETY INSTRUCTIONS.
CREVICE CLEANER
34 tough steel bristle brushes mounted solidly on a sturdy steel wheel gives
our Crevice Cleaner the power to cut through weeds, dirt and debris in all
those hard to reach places
How to Mount
First remove the existing tine attachment on
your cultivator. Place the Crevice Cleaner on
one side of the unit and the idler wheel on the
other. Be certain that the retaining pins are
inserted on both the left and right axles before
using the Crevice Cleaner. Slip on the hood
extender over the Crevice Cleaner brush by
bending it in a semi-circle so the channels on
the extender slip over front and back edges of
tiller hood. Push it in towards the transmission.
How to Use
IMPORTANT: WEAR YOUR GOGGLES!
For hard surfaces such as concrete, pull the
tiller towards you with the Crevice Cleaner
going into the area that you want to clean. For
softer material such as blacktop, brick or slate,
work the tiller backwards and forwards in a
sweeping motion so that the Crevice Cleaner
is perpendicular to the crevice. NOTE: Be sure
to first test the proper cleaning method and
rotation speed in an inconspicuous area for
the type of material you are trying to clean.
!
!
!
!
Crevice Cleaner
CREVICE CLEANER CAT. #921C8222
418-1
9222-21
4106
486
416A
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire